BlogYueNMe: 2009

Melloman tape-looping keyboard

>> Saturday, December 12, 2009

[Michael] tipped us off about an incredible build from back in 2005. The Melloman is a keyboard that uses a different tape loop for each key. The instrument is generally known as a Mellotron, and consists of a different looping tape for each key. When a key is depressed, the head comes into contact with the key and plays the sound sample.

This particular implementation uses 14 Walkmans to supply the tape loops. The Walkman units are constantly playing but the audio output is not enabled until a key is depressed. The main description of the instrument is on the final project page linked above but there are many construction photos available in the build log.

Update: After the break we’ve embedded a video that will take you on a tour of the components of the Melloman. To clear up the looping issue: a Mellotron uses tape loops, but the Melloman uses tapes that are 30 minutes on each side instead of loops.

Read the rest of this entry »

X-mas Hack: 8-channel musical show

We’ve been seeing them appear one house at a time over the last few weeks as Christmas lights are making their annual appearance. Some folks just throw a set of net-style lights on the bushes and call it good but that wouldn’t suit [Noel]. He’s outfitted his house with a show that includes music, 8 controllable light channels, and an Internet interface.

He’s used a plastic toolbox as an enclosure to house everything. Affixed to the base of the enclosure are eight solid state relays for the strings of lights. An Arduino is used to control the SSR switching, playback music through an FM transmitter, and to interface with the wireless bridge.

Rubberneckers can tune their radio to the broadcast frequency and log into the web interface to request their favorite tune or track Santa’s current location. The device even implements VU monitoring to sync the light show with the music. If you want more, watch the video after the break or check out his step-by-step instructions. The Arduino library sure makes the code pulling this all together pretty simple!

Read the rest of this entry »

Nokia 5235 Coming in 2010

The year isn’t over yet but as early as now, we are getting teasers on some potent phones scheduled for release. Nokia, one of the popular mobile phone brands, is scheduled to release a successor for its Nokia 5230 with the coming of the Nokia 5235. The phone is expected to come out by the first quarter of 2010 with features like a 3.2” touch screen, 2 megapixel camera and a Symbian S60 5th edition. The 5235 practically carries the same specs of the 5230 but cheaper at about $214, which is €100 cheaper.

There is one lacking feature though, the Nokia 5235 doesn’t have a GPS. Well you just can’t have them all right?

(Source) Engadget

Blogger Templates: Shush

Shush is a minimalist and extremely flexible template with flexible multiple columns (2 or 5 columns). You can change the columns, all background and font colors, and font types without doing any coding.

Download (54.9 KB)

The wide sidebar is 184 px wide, perfect for square Adsense boxes. All the 3 lowerbar columns are 250 px wide.

Comment Box

To have your comment box function properly, go to Settings > Comments, look for the Comment Form Placement and click on the 'Embedded below post' button. That's all you have to do if you use this template. The codes have already been modified for you. See this post for more detail.

Features

The "Read more..." function is available to shorten posts.
Almost all colors and fonts are easy to customize.
Blog Posts Edit buttons are fully functional.
Flexible number of sidebars.
Menubar below the header for easy navigation.
Header image can be easily changed.
Tested ok in all browsers using Browsershots.org.
Read this if your comment form doesn't work.

Important: Change your template without loosing any sidebar widgets.
Help links: template installation guides and instructions.

Header Image
To put the header image in your blog, click on the image below to open up a larger size and save it into your computer. Then, upload the image using the Layout > Page Elements > Header Edit tab. If you want to use your own image for the header, the image width has to be 960 pixels (with any height).

Sugru – moldable silicone adhesive

Reader [James] told us about a new product developed with hackers in mind. Sugru is a silicone-based adhesive that cures at room temperature. It is moldable and once hardened it remains slightly flexible. You can see in the picture above that it has been used to create a hook but the inventor shows off a slew of other uses such as replacing missing feet on a chair, molding hand grips, and waterproofing. One of the most enticing aspects is that Sugru will create a chemical bond with smooth metal.

The product reminds us of the two-part earplug material used to ruggedize electronics from a while back. The difference is that Sugru is one part and is an adhesive. It comes as a satchel full of individually-sized packets. To use it, choose how much you need, cut open the package to reveal the product, then knead and mold the chewing-gum-looking substance to fit your needs. Check out the demonstration video after the break.

Want to try some out? Yeah, so do we but it seems they’ve already sold out of their initial supply (good for them, bad for us) and we haven’t seen word on pricing. We’d love to use this to mold enclosures, and for about a billion other things.

Read the rest of this entry »

What’s the worst way to transmit video?

Perhaps the worst possible way to transmit video would be to send all pixel data in parallel. That’s exactly how [Gebhard Sengmüller's] parallel image device works. To be fair, this is an art piece called “A Parallel Image” that addresses the concept of where we would be if serial data transmission had never come to fruition. The brochure (PDF) accompanying the exhibit gives the juicy details we’re always looking for.

The device consists of a photo sensor unit and a display unit. Both are one-square-meter stripboard panels made of epoxy. The sensor unit consists of a 50×50 grid of photo-conductors that have their counterparts in the 50×50 grid of light bulbs on the display unit. Things start to get pretty crazy when you throw in the 7500 meters of magnet wire that connect the 2500 pixel sensor unit to the display unit.

You should be able to put together how this works. The sensors pick up light and then effect the brightness of the corresponding light bulbs. The result is an interesting image, and a nightmare of wire porn that would drive any TV repairman to drink.

Read the rest of this entry »

Nunk on Droise

Nunk on Droise is an art installation where noise is made depending on how drunk you are. In a configuration that could be called a cthoilet, the sensors shown above are alcohol sensors. Though we initially thought this would be testing urine, the description states that it tests the breath of the participant. Unfortunately there aren’t any schematics or code, though you can see how it is all assembled from the flickr pool. You can also see a video demonstration of the prototype.

Water the tree – there’s an app for that?

Well no, but [Chris] needed something to remind him when to water the tree. Most folks would use their nifty iPhone to set up a calendar reminder, but why do that when you can purpose a 32 bit microcontroller to do it for you?

To detect a falling water level [Chris] attached a two-pin header to the end of a clothes pin clipped to the side of the tree stand. When the water level is covering the pins it completes a circuit, verified by a measurable current. When the water level drops the mbed microcontroller detects the loss of conductivity and through some creative code sends out an email and SMS reminder.

If you’re in love with your iPhone but not your living things, this will keep that tree kicking until after the new year.

Simple liquid dispenser for auto-cocktails

[Qdot] came up with a simple way to dosing out liquids to use in his Bartris project. As you can see above, flexible tubing is connected to some inverted bottles that house the liquid. A chopstick is attached to a board on one end, and via string to a servo on the other. When the servo turns it pulls the chopstick tight against the board, cutting off the flow of liquid through the tubing. This isn’t as elegant as the system the Bar2D2 uses but it’s a heck of a lot less expensive.

You can check out some of the build pictures in his Flickr pool. He’s included this concept in a project he calls Adult Mario. Watch the video after the break but the quick and dirty is that the more coins you score in Super Mario Brothers, the more beverage is rationed out into your cup. Ah, human lab rats, is there nothing they won’t do for booze?

Read the rest of this entry »

Ionocraft aka Lifters

It’s hard to believe that in five years we haven’t covered lifters before. This realization was sparked when [Tyler] tipped us off about a lifter project demonstrated at the Kansas City hackerspace called CCCKC.

Lifters, the casual name for ionocraft, fly without combustion or moving parts. We’re not going to tackle the particulars of what makes flight possible, but high voltage is required to feed the phenomenon that provides the lift. One of the first comments when we asked what to do with old CRT monitors was to use them for lifters. The flyback transformer puts out plenty of voltage if you can tap into it without killing yourself (no, seriously, that’s an issue).

This is the method that the CCCKC folks used. Take a peek at the video after the break. If you’re thirsting for more fun with lifters, stop by the Lifter Project.

Read the rest of this entry »

Homebrew Kodachrome

What do you do if you can’t find the film that your camera uses? The answer seems pretty simple, you just make it yourself. Making film is not a simple task. There are multiple stages involved and it all has to be done in complete darkness. This project is causing a bit of stir in its respective communities. Though not completely finished yet, it is already an impressive piece. Everyone is waiting eagerly for it to be completed. You can find a few of the discussion groups linked from the flickr page.

[via BoingBoing]

Overly complicated gas guage

While this is most likely overkill for a gas gauge, we do thank [VadimS] for sharing the information. He shows us how to build a capacitive liquid sensor using an Arduino, some foil and some wire. He’s basically detecting the difference in capacitance between the foil sheets. As he gets more water in the bottle, the capacitance goes up. At least we think thats what is going on. He has included the source code for the Arduino, both for handling the sensor and running the LCD display shown in the picture above. When completed, this will be used in his dune buggy for a gas gauge.

Creating wooden enclosures

[Matthias] built a wooden enclosure for his keyboard. He’s used to using a Commodore 64 keyboard and decided he didn’t need the num pad found on modern keyboards.

It’s not the finished product that interests us, but the methods he used to create such a nice looking enclosure. From the wooden binary adder he produced we know he’s a talented woodworker. He takes us step-by-step through the use of a scroll saw, table saw, and router tabled to turn out this one-of-a-kind. You may not own these tools but someone you know does. Follow his example and turn out your own wooden wonders.

[Thanks Harald]

Fully-automatic crossbow

We received an excited email from [Noah] regarding a gentleman who works with crossbows and crossbow pistols. Begrudgingly, we took a look and what we saw made our day. [TheDuckman666] must have an insatiable love for all things crossbow. His webpage has details and pictures covering seven different models that he built. His YouTube channel shows off three more models, all with magazines for multiple bolts.

Seeing the electrically-cocked, automatic projectile launchers wets our appetite, but we do wish there was more background info about the build process.

Verizon users shout “I am root!”

Droid has been rooted. It was only a matter of time but we do like to celebrate this sort of thing. Why? Because if you pay for it you should own it. This will probably spark a flame war about licensing agreements and such in the comments but answer this: if it breaks, who pays to fix it? If you’re the one paying for it, you should be able to do what you want with it.

The process seems simple. Copy the magic file onto your SD card and go through the firmware upgrade process. Just make sure you know what you’re doing so that you don’t brick this sexy device.

Robot hands you your ass at beer pong

Guess who built this contraption? You’re right, college students. But as much as we like to make fun, the subject of Beer Pong is our addition, not theirs. The device uses an air stream that can be directed along two axis to control and sort ping-pong balls.

Unlike the lethal ping-pong ball launcher, the goal here is elegant control of the ball. They’ve achieved a great success. Watch the video after the break to see balls sorted into beakers by color, transferred to vessels over a large distance, and navigated through an elevated obstacle course. To give us a hint of what you can do with this, we see the machine controlling an apple, an onion, and a water bottle at the end of the video.

Read the rest of this entry »

Bendërbrau now a reality

It appears to be 5 o’clock somewhere as everyone seems to have only one thing on their mind. [Simon] set out to make his own Bender Brewer from the television show Futurama. But he made sure to include some key functions from episodes in the series. First and most notable Bender’s stomach contains a beer brewing kit, we think a coffee roaster would have been better, but to each their own.What we hackers love best is the ‘brains‘ of Bender, a 6502 processor controlled via remote to play a selection of 15 random sayings, including the infamous “Bite my shiny metal”, well, you know.

Finally, yes, we do realize this project was started and finished about 2 years ago. We like to think we allowed it time to ferment.

[Thanks Leo]

AC Shield will take your breath (heart beat) away.

[Ryanjmclaughlin] came up with the idea of a Arduino shield that uses TRIACs to switch four channels of AC power. The forum thread he started delves into several interesting discussions covering what it would take to convert this for use with 240v power and of course, a debate about safety.

A reader named [Victor] sent this tip to us and mentioned that this shield might significantly reduce the number of Arduino related projects we see. That’s because mixing high voltage alternating current with delicate 5v logic circuitry can be a bad idea. We’re not saying the creator of this didn’t know what he’s doing, but if you don’t you could fry up your Arduino, or your body.

WiiMote + iPhone Update

Using a Wii remote as the controller for iPhone games? Brilliant! We’ve been waiting to see some creative usage of this pairing since we covered it back in August. [ZodTTD] is the person who ported MAME over to the iPhone. Now he’s added support for the Wii remote in Mame4iPhone via the BTstack project. BTstack seeks to add Bluetooth stack functionality to devices that don’t have it or where it is limited (the iPhone).

We’ve embedded video after the break of the WiiMote used to play a MAME game. [ZodTTD] is also the author of nes4iPhone, we hope that’s the next project he will add BTstack support to!

Read the rest of this entry »

Bulbdial clock kit released

Evil Mad Scientist Laboratories has just released a Bulbdial clock kit. This has come a long way since their first prototype, featuring three PCBs to carry the 72 charlieplexed LEDs. For accuracy they’ve included an optional header for a ChronoDot precision RTC.

With a great looking face and laser-cut acrylic case available, this may soon adorn our mantle. Time to write that letter to Santa…

Word Clock redux

[drj113] wrote back to let us know his latest version of the infamous Word Clock, now in Arduino flavor. You may remember when we originally showed you the Word Clock back in September, while much hasn’t changed, he’s added and modified a few things to make it more user-friendly. Most notably is the use of Arduino instead of PIC, while some commentators will complain this as a waste of an Arduino, it is extending the project towards those who are less technically inclined. Other changes include a new case, dedicated time changing buttons, and blue LEDs (and who doesn’t love blue).

We would also like to give [Alex], one of our commentators, a shout out with is QlockTwo. Same Word Clock concept, but used acrylic, paper sheet, and stickers to produce a much smoother look.

Remote control pellet gun – with scope

Project Thunderbird is an automated predator and pest control system. It consists of a pellet gun mounted in a motorized base. The icing on the cake is a 60x zoom camera that has cross-hairs superimposed on the picture. This reminds us of the Internet hunting for the handicap we heard about years ago.

In the video after the break you can see how the motorized base works, watch the trigger-pull motor, and observe a demonstration of some target practice. The creator, [Gadgetapodimus], mentions the possible sale of plans and kits as soon as he completes the system. Perhaps it would be better if this was not easy for people to build.

Read the rest of this entry »

Remote bike mountain

The Remote Bike project, caught our eye today. Inspired by “cliff hangers” on the tv show “The Price Is Right”, [atduskgreg] has built his own version. In this version, the bike on the mountain makes progress, or slides back down the mountain based on the speed you pedal. If you maintain your target speed long enough, you make it to the top of the mountain and win. The RPMs are gathered from a stationary bike using a hall effect sensor, then piped to an Arduino that controls the bike via a stepper motor and string. That seems fun, and a decent alternative to biking through google maps or something. We have to wonder how long this would be amusing though. Then again, when you’re on a stationary bike you are usually just using a timer or a heart rate monitor anyway, so this is pretty cool.

[via flickr]

Bender keg cooler

What? Another Bender project? This almost went in the trash since it looks so much like the bender brewer from earlier this week, we thought it was the same tip. This isn’t a brewer though. This is a keg cooler, made to look like Bender. You can follow the build process to see exactly how they constructed it. They did a great job, the tap is in his cigar, and the keg resides in his body. Fantastic job guys, now you need some Benderbrau to dispense.

[thanks hexmonkey]

The Harlequin project

This impressive little mod is quite fantastic really. [pakkei] has constructed the Harlequin, a home-made version of the Microsoft courier. This was a stock Dell mini9. Now, coupled with a display link touch screen monitor that happens to be identical in size and resolution to the original, it has become a new device. He has loaded Windows7 and is currently working on a case that can hold all the bits a little more organized than what you see above. We can’t wait to see this finished.

Arduino shield for Arduino. No, really.

>> Sunday, December 6, 2009

We’ve been accused on more than one occasion…okay, pretty much every single day…of harboring some kind of creepy Arduino love affair. The topic does come up an awful lot here, we’re not oblivious to that, and had been patiently waiting for April Fool’s Day to post an article lampooning the whole situation, both ourselves and critics alike, so that everybody could have a good laugh (or possibly annihilate the entire planet in the resulting flame war, we’re not sure). And what could possibly make for a more self-referential joke than an Arduino shield…for Arduino?

Truth, as it turns out, is stranger than fiction. “Core2duino” is — seriously now, no joke — an Arduino shield containing a second ATmega microcontroller and full complement of I/O pins. The two chips in this Young Frankenstein-esque assemblage coordinate over the I2C bus, providing, at least in theory, more processing power, more I/O, and perhaps a degree of fault tolerance. In reality, we’re pretty skeptical, but do have to give them props for a great Instructable, detailing the whole process start to finish with Eagle CAD files, board etching and drilling, and advice on where to score free Cosmopolitan magazines (it helps “if you know any women,” we’re told).

There’s no indication whether this works with stacking headers to allow for an Arduino shield for Arduino shield for Arduino, or perhaps some Möbius strip-like endless stack of Arduinos. Feel free to discuss in the comments. We’ll be waiting in our concrete bunker 37 miles away!

Double dose of iPhone camera hacks

Why take an iPhone, a slim device that already takes decent photographs and add several macro magnifying lenses? For [Mathijs], simply because he could, But now he can take some awesome macro pictures.

[Bhautik] (maker of the tilt-shift Plungercam) took the concept further. With some more trademark plumbing supplies and a lot of duct tape, secured an interchangeable SLR lense assembly to the back of his iPhone.

Check out some photos from both setups after the break

Door opening help

>> Friday, November 27, 2009

For those who are seeking prosthetic limbs, or just require a little bit of robotic gripper help, the choices are very few and very costly. A newcomer to the area is hoping to change the costly part with their door opening arm. Costing only $2,000 to build, it is quite cheap compared to the other offerings. This arm can grip, twist, and swing its arm at the same time using a single motor thanks to a slip clutch.

[via Poular Science]

Four tear-downs for your Friday afternoon

We know that feeling, you’ve been up all morning working hard, and now you just want to relax. What better way than to sit back and watch as helpless electronic devices are stripped, forced to show their goods, then put back together only hap hazardly – not that we’re into that or anything. Today, we had one thing on our mind, game systems.

With the release of Pokémon HeartGold and SoulSilver shoppers were also given a device called the PokéWalker. A pedometer that helps your pocket monster gain experience and affection towards you. Here is a tear-down of the device next to Nintendo’s other try at getting children active, the Activity Meter pedometer. [Thanks Arty2]

Sega, while in todays day all we see is more and more rip offs of everyone’s favorite Hedgehog, we do remember a time when you brought more to the game field, especially with your advanced consoles. It does bring a tear to our eyes seeing this beast being torn apart, but its all for the best.

Those keeping up with Nintendo’s DS series will notice one thing, the console keeps getting smaller and smaller. That trend continued until the (Japan) release of the DSi LL. Some think its size can be attributed to an easier to see screen, others feel its jam-packed with more features. Make your own decision after seeing its tear-down. [via engadget]

Finally, we couldn’t decide what a fourth tear down should be, and couldn’t just leave with only three. So how about 10 separate Sony gadgets torn apart!

DS goes full size – pockets everywhere rally in protest

It’s hard to believe we missed this one from a couple of years back but we’re thankful that reader [Christian] tipped us off about it. This a Nintendo DS with two tablet pc screens being used as an external display. He’s using an FPGA but not to emulate the processor. It is translating the video data from the DS board into usable signal for the larger LCD screens. In the video after the break you can see that pen input has been implemented, with the FPGA sending location data back to the DS.

[Neal], the creator, priced the project out at around $580. It’s worth a lot more considering the know-how needed to get the video scaling and pen input right using the FPGA. It won’t fit in your pocket, but it doesn’t have a case either so it’s not going anywhere anytime soon.

Read the rest of this entry »

Autonomous Turret wielding biped bot

Pay close attention. At roughly 36 seconds we see Asimov’s laws going out the window. We’re pretty sure we saw this little autonomous battle bot take a shot at a human. We can’t tell for sure, but it looked like it enjoyed it too.

This bot is being built by [xdream] to compete in the Mech Warfare section of the Robo Games 2010. His target acquisition system and firing are completely autonomous. We think his motion is controlled by an operator though.

This little fellow may seem harmless enough, until you realize that those servos and guns could be replaced and this “little guy” becomes that “big fella”. That’s not anything the maker suggested, we’re just pointing out that a killer robot is only cute when it’s small.

[via BotJunkie]

Tiny keyboard/touchpad has “hack” written all over it

Yes, we know, this is not a hack, yet it just has the vibe of something we’ll likely be seeing in many small form-factor systems and wearable hacks in the future.

The USB Wireless Handheld Keyboard is a diminutive keyboard and mouse replacement with a passing resemblance to a BlackBerry PDA — where the screen has been replaced with a laptop-style trackpad sensor. This seems a shoo-in for home theater PC use; it’s unobtrusive and won’t look out of place on the coffee table alongside the universal remote. But any tiny system requiring only occasional input could likely benefit.

The keyboard layout is funky as heck, though likely adequate for its intended use of couch web-surfing and interactive messaging (or whatever wild applications our readers will surely come up with). A USB wireless receiver and a charging cable are included in the $62 package. Video after the break…

[USB Geek via Engadget]

Read the rest of this entry »

Recover borked HDD after Xbox 360 ban

[Incudie] tipped us off about a method to fix a borked HDD in your Xbox 360. Many of the one million consoles banned earlier in the month also had the hard disks scrambled making off-line gaming impossible as well. It turns out that this is caused by having a ban flag in the NAND chip on the motherboard. It has been discovered that because of wear levelling, the NAND will have two copies of the “secdata.bin” file which stores the ban flag. Please note, this will NOT allow the console to use Xbox Live, it just re-enables the HDD.

The quick and dirty of the fix is as follows: First the NAND is dumped from your Xbox 360 to a computer. After verifying the file, it can be opened in a HEX editor and the two copies of “secdata.bin” located. Once identified by date, the older version is injected on top of the newer to overwrite the ban flag.

Looks like this is not for the faint of heart, but if you got banned for modding in the first place this should be easy to pull off.

Update: Looks like xbox-scene now has a collection of apps to help you with this process. [Thanks CollinstheClown]

Make any gloves work with a touch screen

The chill of autumn is upon us, and with it comes the awkward sport of trying to work touch-sensitive phones and gadgets with gloved fingers. One can try toughing it out with fingerless gloves, or we’ve seen some costly solutions in the forms of specialized gloves and capacitive-compatible styluses, but sometimes simple is best: all it takes is a few stitches of conductive thread in the fingertips.

Conductive thread is available from various sources; SparkFun Electronics comes naturally to mind, but most vendors carrying the LilyPad Arduino will stock a suitable thread as well. Don’t fret if you’ve never sewn before — just a few simple loops are required, and it doesn’t need to be especially tidy. In principle this should work for trackpads and capacitive mice as well, if you use those in the field. For multitouch devices, add a separate conductive bit to each fingertip.

[via Lifehacker]

Turkey fryer; awful, bad, and worse

Tomorrow’s turkey day here in the United States. Do you fully expect your trashy neighbor to burn down his house while trying to cook a holiday feast? To see what’s in store for your neighborhood we’ve rounded up a great collection of idiots deep frying turkeys. Read the rest of this entry »

TI sports watch for hacking

How would you like to have a 3-axis accelerometer, pressure sensor, temperature sensor, RF wireless, and an LCD screen in a development package? What if we told you that you can have it in the form factor of a wristwatch offering from Texas Instruments? How much would you pay for such a device? Quit guessing, you can pick it up for just $49 with an estimated delivery in mid-February of next year.

Our tip-line has been packed with emails about this since it was announced on Monday. The device ships with the firmware to serve as a sports watch with heart rate monitor. The price is pretty good just for that functionality but this package also includes a USB programming and emulation dongle so that you can develop your own firmware. It looks like the included development software is written for Windows but we’re hoping you can get it running on other platforms as well.

The LCD is a segment display, so you won’t see DOOM running on board. That said, we expect your first project to turn this into a wireless controller using the buttons and accelerometer.

Voice controlled lock? Almost…

If you watched the video before reading the article (like we did) and started shaking in your boots at a voice controlled lock system, prepare to be disappointed. His spoken commands are actually to his son to press the appropriate keys on a keypad off screen, the lock is not actually voice controlled.

But still, [Michael Krumpus'] door lock is pretty astounding. By using a torn apart CD drive he easily attains a nice fast and smooth linear motion to bolt and unbolt his door. It wont open his door like some locks we’ve seen, but it will probably be added sometime in the future…right alongside voice commands.

[via DVICE]

Digital BMXing through San Francisco

[Alpay] sent in this project he did recently. He was hired to produce a kiosk that would stand out to the kids at the event. He chose to make a bike riding game utilizing open source hardware and software. There was some thought put into what interface to use to make it easiest for people to just pick up and use. The ultimate decision was a simple one. Use real handle bars from a bike. As for software, they used Blender, the open source 3d creation program. The actual control is done via a pair of Arduinos, an accelerometer, and a pair of XBee modules.

He notes that blender is fully capable of accepting the serial input from the controller, but they opted to have the controller mimic keystrokes to make life easier on the developer, as well as make the controller usable on more games. Maybe if enough people ask really nice, he’ll release the source code for the controller.

Commodore SQ1000 twitter wall: the twypper

Before we begin, let us soothe those first dreaded thoughts. No, the commodore was not destroyed in the process. They can simply clip the 16 wires they added to interface the keyboard and be back to stock. Breathe a sigh of relief, and enjoy the twypper, a twitter wall made from a commodore SQ1000.

[Alex] needed to make an interesting project for his companies Openspace/hack day. A friend, suggested a twitter wall, and that’s when [Alex] got the idea for a typewriter. After a quick search, he found oomlaut’s typewriter. They didn’t let that deter them from making their own version though. They found a nice fully functional commodore SQ1000 and began hacking. Ultimately they simply decided to use an Arduino to short the key switches to simulate typing. There are all kinds of details on the necessary steps to get the typing to function absolutely correct on the project page. Over all it was well done and we’re happy to see that it can be undone just as easily.

$100 free from your favorite hobby supplier!

We were wary at first when the email came in with the headline “SparkFun is having a free day” and figured surly this is in relation to recent events? But no, after 7 years of loyal customers, SparkFun is simply giving back to the community.

It’s interesting to think that without their services, we wouldn’t have some of the amazing hacks we introduce every day. Such as the DIY mood lamp, or Cell phone alt-variometer, or Arduino iPod remote control. And their free day will allow some disadvantaged hackers the ability to finally flex that muscle sitting between their shoulders. What do you plan to make?

Mark your calendars folks, On January the 7th 2010 SparkFun is giving every household a $100 (until they reach $100k), if that’s not an incentive to wake up early, what is?

As a side note, do you think we’ve had enough posts about SparkFun lately?

[Thanks Diego]

Hack a Sketch

Sometimes we miss that old Etch a Sketch we had when we were kids. The challenge of producing a decent image using those two knobs was always fun and frustrating at the same time. This project lets us recreate this interface on our computer. The Hack a Sketch is a combination of an Etch a Sketch style input and a processing sketch to recreate the experience. They’re using an Arduino to interpret the inputs and feed it to the computer via USB. We really like this thing. Simplify the electronics and we could see this as a neat toy for sale somewhere like Thinkgeek.

[via hacked gadgets]

Cable management for pull-out shelves

Cable management is a headache for all, and if unmitigated it becomes a playground for cats. [kws103] posted a project a while ago that takes care of the messy wires for electronics on pull out shelving. Channel bracket is used to house the cables and has been articulated in three places to facilitate the movement of the sliding shelf. For an added touch an outlet was built into the surface to make it easy to unplug and remove the components if necessary. The hinges for articulation use aluminum base plates and rely on rivets as a pivot point, something that might need improvement if pulling the shelf in and out is a common occurence. Add this to the Ikea based solution we looked at in August and your days of electronic rats nests may be coming to an end.

STM8S-Discovery: Microcontrollers reach a new low

A complete microcontroller development kit for little more than the cost of a bare chip? That’s what STMicroelectronics is promising with their STM8S-Discovery: seven dollars gets you not only a board-mounted 8-bit microcontroller with an decent range of GPIO pins and functions, but the USB programmer/debugger as well.

The STM8S microcontroller is in a similar class as the ATmega328 chip on latest-generation Arduinos: an 8-bit 16 MHz core, 32K flash and 2K RAM, UART, SPI, I2C, 10-bit analog-to-digital inputs, timers and interrupts and all the usual goodness. The Discovery board features a small prototyping area and throws in a touch-sense button for fun as well. The ST-LINK USB programmer/debugger comes attached, but it’s easy to crack one off and use this for future STMicro-compatible projects; clearly a plan of giving away the razor and selling the blades.

The development tools are for Windows only, and novice programmers won’t get the same touchy-feely community of support that surrounds Arduino. But for cost-conscious hackers and for educators needing to equip a whole classroom (or if you’re just looking for a stocking stuffer for your geeky nephew), it’s hard to argue with seven bucks for a full plug-and-play setup.

[thanks Billy]

Electronic guitar pick tunes the strings for you

The Stimmmopped is an electronic guitar tuner made to be used as a guitar pick. This uses two LEDs synchronized to blink at the exact frequency of the string you are tuning. Pluck the string with the corner of the PCB and then shine the light on the string you are tuning. As the vibrating string moves back and forth it will only pick up the spot of light when the frequency matches that of the blinking LED. Once in tune, both red lights will appear to be constantly illuminated and immobile on the string.

An Atmel ATmega8 is used to control the device, interfacing with two buttons and a seven-segment display to choose the pitch currently being tuned. Gibson has a robotic guitar that features an auto-tuning mode, but if you don’t want to shell that much this low cost and simple build is for you.

[Thanks Sören]

CNC circuit board fabrication

[Jonathan Ward's] pcb mill is as impressive as it is inexpensive. Twenty-six plywood parts, labeled A-Z, are used to assemble the machine along with the customary precision rods, stepper motors, and router assembly. His bill of materials prices the unit at $458.18, a small price to pay in order to forgo a multi-step etching process.

His test board shows some fairly fine pitch that could turn out most home-project circuit boards. We’ve contacted [Jonathan] regarding the specifics of milling the plywood parts out of a 2 foot by 4 foot sheet of plywood. Watch for an update with any information he’s willing to share. We hope he’ll make the milling files for the plywood parts available so that you can build a copy of the device for your own use.

[Thanks Charles]

SparkFun product used for immoral hacking

While we have our fun ethically hacking, its very easy to forget that sometimes our ideas could be used with malicious goals. Take for instance SparkFun’s BlueSMiRF – the device’s original intention is simply to act as a wireless serial cable replacement. After hackers discovered several PIN pads use a serial interface, they put one and one together to steal several hundreds of people’s personal bank accounts.

It seems SparkFun is getting a lot of heat lately, but we’re glad they stand up and address these issues. You can check out the original news clipping here.

Automatic pneumatic drum kit

Move over Steve and PEART… there’s yet another robotic drummer in town. [Fauzii] tipped us off to his own MIDI-controlled creation – WizardFingers. According to him, WizardFingers is already capable of 64th note rolls at over 250 beats per minute. That’s on every drum simultaneously. Each drum is hit with a lever attached to a linear pneumatic actuator. A laptop running MAX/MSP generates MIDI sequences, which are sent to Doepfer MTC64 board. All of these actuators are hooked up to the board, which sets them off in sequence.

[Fauzii] ultimately hopes to develop AI software that will allow WizardFingers to compose its own tunes on not only a drum kit, but bar chimes and an organ as well. His site documents the whole concept quite well (just watch out for wild cats).

Blogger Templates: On The Road

On The Road is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.

Download (55.9 KB)

The wide sidebar is 300 px wide, perfect for square Adsense boxes. The two narrow sidebars are 132 px wide. All the 3 lowerbar columns are 272 px wide.

Comment Box

To have your comment box function properly, go to Settings > Comments, look for the Comment Form Placement and click on the 'Embedded below post' button. That's all you have to do if you use this template. The codes have already been modified for you. See this post for more detail.

Features

The "Read more..." function is available to shorten posts.
Almost all colors and fonts are easy to customize.
Blog Posts Edit buttons are fully functional.
Flexible number of sidebars.
Menubar below the header for easy navigation.
Header image can be easily changed.
Tested ok in all browsers using Browsershots.org.
Read this if your comment form doesn't work.

Important: Change your template without loosing any sidebar widgets.
Help links: template installation guides and instructions.

Header Image
To put the header image in your blog, click on the image below to open up a larger size and save it into your computer. Then, upload the image using the Layout > Page Elements > Header Edit tab. If you want to use your own image for the header, the image width has to be 970 pixels (with any height).

Blogger Templates: Werd

Werd is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.

Download (56.1 KB)

The wide sidebar is 300 px wide, perfect for square Adsense boxes. The two narrow sidebars are 132 px wide. All the 3 lowerbar columns are 265 px wide.

Comment Box

To have your comment box function properly, go to Settings > Comments, look for the Comment Form Placement and click on the 'Embedded below post' button. That's all you have to do if you use this template. The codes have already been modified for you. See this post for more detail.

Features

The "Read more..." function is available to shorten posts.
Almost all colors and fonts are easy to customize.
Blog Posts Edit buttons are fully functional.
Flexible number of sidebars.
Menubar below the header for easy navigation.
Header image can be easily changed.
Tested ok in all browsers using Browsershots.org.
Read this if your comment form doesn't work.

Important: Change your template without loosing any sidebar widgets.
Help links: template installation guides and instructions.

Header Image
To put the header image in your blog, click on the image below to open up a larger size and save it into your computer. Then, upload the image using the Layout > Page Elements > Header Edit tab. If you want to use your own image for the header, the image width has to be 980 pixels (with any height).

Blogger Templates: Snowy Winter

Snowy Winter is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.

Download (56.1 KB)

The wide sidebar is 300 px wide, perfect for square Adsense boxes. The two narrow sidebars are 132 px wide. All the 3 lowerbar columns are 265 px wide.

Comment Box

To have your comment box function properly, go to Settings > Comments, look for the Comment Form Placement and click on the 'Embedded below post' button. That's all you have to do if you use this template. The codes have already been modified for you. See this post for more detail.

Features

The "Read more..." function is available to shorten posts.
Almost all colors and fonts are easy to customize.
Blog Posts Edit buttons are fully functional.
Flexible number of sidebars.
Menubar below the header for easy navigation.
Header image can be easily changed.
Tested ok in all browsers using Browsershots.org.
Read this if your comment form doesn't work.

Important: Change your template without loosing any sidebar widgets.
Help links: template installation guides and instructions.

Header Image
To put the header image in your blog, click on the image below to open up a larger size and save it into your computer. Then, upload the image using the Layout > Page Elements > Header Edit tab. If you want to use your own image for the header, the image width has to be 980 pixels (with any height).

Subscribe to: Posts (Atom)

© Free Blogger Templates Skyblue by Ourblogtemplates.com 2008

Back to TOP