Mechanical mustache envy

While this mechanical mustache isn’t made for a Halloween costume, it certainly looks like part of one. Copper clad, brass, cable, and a few other bits come together in a similar style to tension based hands; the piece is then worn much like a Mardi Gras mask. To complete the rustic “old tyme” look [John] was after, the copper was tarnished using the vapor from a vinegar and salt solution. The finished assembly is steam punk delicious, but we’re saddened by the lack of steam punk eye brows to complete the look (or steam punk mutton chops, or steam punk goatee, or…)
[via Boing Boing]

Read more...

Stroke to unlock

If you’re into embedded clothing this stroke sensor is for you. As demonstrated in the video after the break, stroking the threads in a particular direction will create a circuit that senses and, in this case, turns on an LED. The concept uses two conductive buses on the back of a piece of neoprene. Conductive and non-conductive threads are then added for a furry or bristly finish. When stroked perpendicular to the power buses the conductive threads come together and form a circuit.

For some reason this just seems a bit creepy to us but perhaps that’s only because we haven’t come up with the right application for the technology. We’re pretty sure that a sweatshirt with an LED marquee and a “hairy” back that you stroke to illuminate is the wrong application.

Read the rest of this entry »

Read more...

Scan room, explore virtually

[Patrick] directed us to his project for alternate realism. The final goal is to be able to walk around in a space wearing a head mounted display, exploring a virtual representation of that space. This virtual representation could be altered, stylized, augmented and modified in countless ways. It is an exploration in perception, similar to enjoying different styles of painting, we could enjoy different styles of viewing a real space. Currently, it isn’t quite real time. He has to scan a room with a somewhat bulky device, then plug into his display to explore it. Being able to scan quickly and reliably enough shouldn’t be far off. [Patrick] notes that others have done almost real time scans at home already.

Read more...

Tiny keyboard/touchpad has “hack” written all over it

Yes, we know, this is not a hack, yet it just has the vibe of something we’ll likely be seeing in many small form-factor systems and wearable hacks in the future.

The USB Wireless Handheld Keyboard is a diminutive keyboard and mouse replacement with a passing resemblance to a BlackBerry PDA — where the screen has been replaced with a laptop-style trackpad sensor. This seems a shoo-in for home theater PC use; it’s unobtrusive and won’t look out of place on the coffee table alongside the universal remote. But any tiny system requiring only occasional input could likely benefit.

The keyboard layout is funky as heck, though likely adequate for its intended use of couch web-surfing and interactive messaging (or whatever wild applications our readers will surely come up with). A USB wireless receiver and a charging cable are included in the $62 package. Video after the break…

[USB Geek via Engadget]

Read the rest of this entry »

Read more...

Make any gloves work with a touch screen

The chill of autumn is upon us, and with it comes the awkward sport of trying to work touch-sensitive phones and gadgets with gloved fingers. One can try toughing it out with fingerless gloves, or we’ve seen some costly solutions in the forms of specialized gloves and capacitive-compatible styluses, but sometimes simple is best: all it takes is a few stitches of conductive thread in the fingertips.

Conductive thread is available from various sources; SparkFun Electronics comes naturally to mind, but most vendors carrying the LilyPad Arduino will stock a suitable thread as well. Don’t fret if you’ve never sewn before — just a few simple loops are required, and it doesn’t need to be especially tidy. In principle this should work for trackpads and capacitive mice as well, if you use those in the field. For multitouch devices, add a separate conductive bit to each fingertip.

[via Lifehacker]

Read more...

TI sports watch for hacking

How would you like to have a 3-axis accelerometer, pressure sensor, temperature sensor, RF wireless, and an LCD screen in a development package? What if we told you that you can have it in the form factor of a wristwatch offering from Texas Instruments? How much would you pay for such a device? Quit guessing, you can pick it up for just $49 with an estimated delivery in mid-February of next year.

Our tip-line has been packed with emails about this since it was announced on Monday. The device ships with the firmware to serve as a sports watch with heart rate monitor. The price is pretty good just for that functionality but this package also includes a USB programming and emulation dongle so that you can develop your own firmware. It looks like the included development software is written for Windows but we’re hoping you can get it running on other platforms as well.

The LCD is a segment display, so you won’t see DOOM running on board. That said, we expect your first project to turn this into a wireless controller using the buttons and accelerometer.

Read more...

Tauntaun costume

[Scott Holden] went all out this year and built an amazing Tauntaun costume. The Tauntaun from Star Wars was massive, standing 8 feet tall, and usually carrying a rider. [Scott] wanted to make it the correct size, and ultimately pulled it off. He had to build custom stilts to get the leg angle correct as drywall stilts were too straight. The rest is mainly pvc and fur. We think he did a fantastic job on this. The effect is quite nice, and we can imagine that in person it is even better.

Take note at the bottom of page 3. Apparently, he got pinned in the costume in his workshop and almost had to spend the night on the floor in the costume. That’s pretty wild, at least he was warm.

[via makezine]

Read more...

Biking through Google street view

[Aki] wanted to do some stationary cycling to get in shape. Unfortunately, his stationary cycle is located in his garage which doesn’t supply much inspiration or amusement. His solution was to build a VR rig so that he could ride around inside google street view. He has rigged a simple sensor to his wheel to determine his speed and he’s using a vuzix VR 920 as a display and orientation sensor. While he notes that it isn’t perfect, or even reliable, we think it is pretty cool. He can go sight-seeing, while getting in shape from his own garage. We have to wonder if he gets a headache after a while though.

Read more...

Improved arm mounted flame thrower

[Everett] is at it again with Prometheus, an arm mounted flame thrower.This is the third generation of the project and makes some huge advances over the second generation we saw last year. We’d say he’s reached cinema/stage-performance quality with his design.

The self-contained system is completely arm mounted with a fuel reservoir mounting behind the elbow. The new version adds an adjustable flow valve actuated by a servo motor to regulate the flame size. An arc generator has been incorporated to replace the lighter from the last version. A microcontroller measures wrist angle and takes care of creating the arc and regulating the fuel supply.

Prometheus is small, controllable, and frightening. See a full demonstration as well as some video of the prototyping process after the break. Does this make you wonder how much burn cream [Evertt's] needed over the years?

Read the rest of this entry »

Read more...

Woz’s watch makes air travelers nervous

[Steve Wozniak], Last of the freelance hackers and Greatest swordfighter in the world, lives a hacker life you couldn’t even dream about. The folks over at medGadget ran into him and learned about his watch. In their interview (embedded after the break) [Steve] shows off the Nixie tube wristwatch that we can only assume he created himself.

The watch consists of two tiny tubes, a PCB, and battery. There must be an accelerometer in there because the display is switched off unless the watch is held at a certain configurable angle. Once held in the correct position the display flashes the hours, then the minutes.

The time is set by two buttons inside the watch’s case. [Steve] goes on to explain the trepidation his fellow passengers have when he disassembles the watch mid-flight and starts to monkey around with the buttons inside. Not to be stopped at electronic tomfoolery, he also shares his delight in sneaking ceramic knives on board so that he can properly cut his steaks.

Lifestyle aside, the small Nixie clock packages we’ve seen don’t even come close to this. We assume this is pretty hard on the battery and wonder if the watch gets hot if you’re stuck in a long meeting and constantly looking at the time. We can get over both of those limitations just for the cool factor alone.

Update: Reader [Stephen] left a comment pointing to the origin of the watch. It is controlled by a PIC microprocessor, boasts a four-month battery life at 50 viewings per day, and there’s some code available. It is for sale but currently out of stock.

Read the rest of this entry »

Read more...

Electronic Jewelry

[Ellindsey000] posted this neat little pendant to his flickr stream. We like the way it looks, and the fact that it is a functional circuit. The schematic is even pretty neat. We would maybe wear this, as a belt buckle or something. When we looked at this though, we thought it looked really familiar. Yeah, it kind of looks like the arc reactor from Iron Man, but what we thought of was this cool looking walker. As you could probably already tell, it’s the same person. Great job again [Ellindsey000], and thanks for posting the schemtaic.

Read more...

Power generating backpack

In the military, you have to carry tons of stuff. This is something we hear and see all the time. They are always trying to come up with ways to reduce the weight or quantity of the things that you bring into the field. This power generating backpack harnesses the natural up and down motion of your steps to produce power. This could reduce the amount of batteries carried into the field greatly. That’s what they say anyway, how many batteries do soldiers normally carry around? Aside from that point, we think it is pretty cool. We could see using this to keep our cell phone or GPS charged on long hiking and camping trips. You could also build something of your own to work similarly.

Read more...

Halloween prop: portable black light

[Joshua] wrote in to show us this great Halloween tip. He wanted to take his 4 foot long black light along with him on Halloween. You can buy portable versions, but he realized he had enough parts laying around to slap together a portable one himself. He pulled the inverter from a scanner light and wired it up to a couple of 9 volt batteries. Knowing he would probably need a fresh set during the night, he actually wired in some extras with a switch to control which was powering the unit. We know this isn’t the best solution, but you could probably toss this together in just a few minutes.

Read more...

A bright way to cycle

Want to be visible when cycling at night? [Neon Dean] came up with this possible solution, which he cruised on at Nuit Blanche. Its a bicycle with neon lights mounted on every surface possible. [Dean], who gave a similar treatment to his car, explained how it worked. All of the tubes take their power from a 12VDC battery he carries in a fanny pack. 12V is a far too low voltage to power the tubes, so a step up transformer is used to bring that number way up. [Dean] also decided to install a neon tube on each wheel. In order to deliver power to them, he mounted a rotor on each wheel, with two conductive tracks running close to the edge of each rotor. Two strips of steel act as brushes (in a manner similar to those on slot cars), and deliver the stepped-up power to the tubes. One creative, but perhaps not so bright, idea is [Dean]’s neon tube helmet.

Read more...

Pong on your wrist

[John] wanted to take a pong clock and put it in a wristwatch form factor. Take an afternoon and pour over his detailed build logs. This multi-year project is done with meticulous cleanliness that makes us jealous. He’s milled the case and buttons himself, achieving a professional look that equals or surpasses the quality of some commercially available “gaming” watches. The project centers around an OLED display driven by a TI MSP430F2013 processor. Don’t miss the video after the break covering prototyping, PCB work, case milling, and the watch in action. Currently, this is the third generation of development but with a project this exciting, are you ever really finished? Read the rest of this entry »

Read more...

Pinch control2: laser drawing

[atduskgreg] posted this cool looking rig. That’s a batting glove, chopped up and equipped with a flex sensor and a pressure sensor. The end goal was to create a new method of drawing. You can see he’s interfaced with the servos decently. It seems fairly responsive and intuitive. Looking at his results though, make us wonder if all that effort was worth it. We would probably apply this rig to some kind of animatronics.

Read more...

Life size animatronic wolf tail

We’re not 100% sure the usefulness of this hack, but it is extremely interesting regardless and will probably make a lot of furries happy. WolfTronix presents their method for creating a realistic animatronic wolf tail. It uses an Atmel MCU controlling two servos alongside a mess of Klixx toys and paper clips to produce a nice wag motion. The guide is extremely detailed and looks to be fun, so long as you don’t mind the monotonous task of shaving off potentially hundreds of ‘nubs’ as they call them. Either way, you’ll definitely have the best (and only…) tail on the block.

Thanks [J. Peterson]

Read more...

CrossCanada: a biking documentary

posted by Caleb Kraft
filed under: daily, digital cameras hacks, wearable hacks

[Mike] was going to be biking across Canada. He really wanted to document the trip, so he began planning ways to get still images taken at intervals along the way. After a bit of brainstorming, he ended up setting his goals a bit higher. He was going to film the entire trip. He really didn’t want a simple helmet cam, he wanted himself and the entire bike in the frame. To do this he had to build a long arm on which he mounted a bullet cam. On his handlebars, he has a simple control where he can turn the system on and off as well as initiate recording.

No single piece of this project was too complicated, but taken all together, the final result is quite nice. You can watch the video for yourself after the break.

Read more...

Wide angle lense mod for the ATC2K

posted by Caleb Kraft
filed under: digital cameras hacks, video hacks, wearable hacks

For those that have them, the ATC2K action camera is a decent little piece of equipment. It is waterproof and can save video for roughly 30 minutes on a flash card. The viewing angle of the lens leaves something to be desired though. This has been remedied in newer models. [raalst] shows us how to modify the ATC2K to install a new, wider angle lens, while retaining the waterproof seal. He also takes us through a necessary mod to ensure clear video under water since the new lens was not initially intended for it. Just in case you are curious, he’s using his for hobby radio controlled submarine dives.

Read more...

Power Glove 20th anniversary edition

Using an original Power Glove, a bluetooth module, an Arduino, and an accelerometer, [Biphenyl] brought the system up to date. As you can see in the video after the break, the new version is wireless and much more useful in the games. Skip to 11 minutes in if you just want to see it in action. There’s a full writeup on Instructables if you want to build your own. We love the power glove and we can’t wait to see a more developed game for it. This beats the Power Glove Wiimote, hands down.

Read more...