LEGO router case bests factory finish

Stare at [Luke's] LEGO router case; STARE AT IT! The router is nothing special, a WRT54GL that is fun to hack. We’ve seen it used as a robot, turned into a war driving box, and obviously this is where dd-wrt custom firmware started.

[Luke] designed the case in MLCAD and found a seller for the parts which came in just over $50. We think it’s much better looking than the stock case an if you used that for a different project, this is a way to replace it. We’ve embedded [Luke's] assembly video after the break. If you like this case, take a look at his LEGO PC case as well.

Read the rest of this entry »

Read more...

Amazing chassis hacks

[Crabfu] pulled off some great chassis work on top of a remote control drivetrain. His most recent build turns the tiny traveler into a lunar rover complete with passenger and a communications array. For this he’s sourced the parts from a toy but boosted the realism with hand-painted details that leave us in awe. His previous project sourced the body from a model truck kit. Once again, it’s the paint work that makes us envious of his skills.

Both projects conceal a Losi 1/24 scale micro rock crawler that provides for some incredible locomotion. See video of both builds after the break.

Read the rest of this entry »

Read more...

Update: more pink wireless-terminal hacking

[Dave] poked around inside of an IM-ME wireless toy and compiled his findings. He read about the device when we covered it in November and picked up a couple to see what he could do. He patched into the debug port in the CC1110 processor and enabled it by performing a chip erase. He then began mapping out how the processor connects and communicates with the qwerty keyboard, the wireless radio, and the LCD screen. The board is full of test points which make the hardware easy to access. [Dave's] experiments show that this hackable device is full of potential so let’s see what you can do!

Read more...

GSM Cracked

[Karsten Nohl], with a group of security researchers has broken the A5/1 Stream Cipher behind GSM. Their project web site discusses their work and provides slides(pdf) presented at 26C3. A5/1 has had known vulnerabilities for some time now and is scheduled to be phased out for the newer KASUMI or A5/3 block cipher. This should be an interesting time in the cell phone business.

Thanks to [Tyco] and [MashupMark] for pointing us to this story.

Read more...

UAV reigns down vengeance upon thee

An unemployed electrical engineer can be a very dangerous thing. [Cybrown] has turned his skills toward darker, more awesome applications by building an armed unmanned aerial vehicle. This is a remote control airplane that has a movable camera mounted in the cockpit. Video and GPS data are sent back to the pilot who views the picture via a wearable display. We’re betting this doesn’t have the range that the 100km UAV did, but that’s good because this one brings doom from the skies. Check the wings in the picture above, this RC is fireworks-enable. We’ve embedded flight footage and attack video after the break.

Update: Here is a forum post covering this nugget of awesome. There are just a few details but the entire thread is interesting. Someone pointed this out in the comments but they don’t get credit because they didn’t leave a link.

Read the rest of this entry »

Read more...

Terminate RFID tags

This gun hunts only RFID tags.[mnt], who brought us laser gesture control, built this RFID Zapper but included so much more. Any good weapon has to sound mean, a feat he’s accomplished by incorporating an MP3 player into the rifle. The coil that zaps the RFID tag is powered by a photo-flash unit, but for visual feedback he’s got a second unit that flashes light to signal the demise of your German passport (see the video after the break).

It’s hard to believe we haven’t covered RFID Zappers yet. The concept came out of the Chaos Communication Congress a few years back. This method works by sending a very strong electromagnetic field through the RFID tag that causes it to burn out. There’s a wiki post on RFID Zappers but Firefox threw a certificate warning when we loaded it up; read at your own risk.

Read the rest of this entry »

Read more...

Static Bleeder

When you are in the middle of the desert, pretty much every solution to a mechanical or electrical problem is a hack. [Sgt.M] who was deployed in Iraq sought out the help of radio guru [H.P. Friedrichs] about a static problem he was having. When dust storms would blow in strange things would happen in camp. Humming and crackling could be heard and [Sgt. M] actually had an electrical arc from a lamp to his hand at a distance of about 2 feet.

[Friedrichs] helped him find the problem. Their antennae were acting as static electricity collectors in the dust. All that dust friction in the dry air constantly built up a charge. The solution was simple, discharge the electricity at the antenna when it isn’t in use. Several solutions are outlined on the page, so check them out.

Read more...

Radio Assisted Drawing Device

An exhibition just wrapping up at the Russian Frost Farmers Gallery in New Zealand presented an interactive artwork hack. Called the Radio Assisted Drawing Device (R.A.D.D), it is a plotter that mounts on the wall. It isn’t computer controlled, but rather relies on a remote control with two sticks to move the plotter Etch-a-Sketch style.

A clear gantry mounts vertically and travels along the top edge of the wooden backing. A slot cut in the acrylic steadies the plotter and allows for smooth vertical movement. Obviously built by hand, the mechanics seem to have tight tolerances for precise movements of the stylus. See the exhibit in the video after the break.

Wouldn’t you love to have one of these on the wall at your next party? It adds a whole new spin on a guest book.

Read the rest of this entry »

Read more...

Bluetooth cartridge for Nintendo DS

We’ve received tips from a few different people about a new Bluetooth module that connects as a game cartridge for the Nintendo DS. This is a homebrew solution and not an official Nintendo add-on. The cartridge houses an ATmega168 microcontroller which provides the interface between the DS and a Roving Networks RN-41 bluetooth module.

They’ve provided a schematic for the device but we didn’t see any board artwork or pictures of the internals so you’re on your own for board layout. The libraries needed to use the bluetooth connection with homebrew software are up for download. This should provide a nice way to use the DS with a Bluetooth GPS module, or perhaps as a discrete Bluetooth sniffer and spoofer.

Read more...

See through walls via wireless network

Researchers at the University of Utah have been able to detect movement in a room based on variations in wireless signals. Accurate to about a meter, they are using a 34 node wireless network to do their sensing. As a person moves, they change the signals, and can therefore be detected. They state one possible application being rescue workers deploying multiple wireless nodes around a building to find people located inside.

[via Gizmodo]

Read more...

Sony’s wireless electricity offering

In August we covered a wireless electricity presentation from the TED conference. Now Sony has put out a press release on their wireless flat panel television prototype. The device is capable of operating without audio, video, or power cables connected to it. This is possible at distances up to 50cm at efficiencies as high as 80%.

As was talked about in the comments of the other article, the efficiency compared to that of a cable doesn’t blow our socks off. But this does show mainstream development of this technology. We hope to see advances in both efficiency and distance. We also look forward to that small black box (which we presume facilitates the energy transfer) being integrated into the TV’s body.

[via Gizmodo]

Read more...

CN Tower synced with techno

As part of Nuit Blanche, Toronto’s annual community art event, the CN Tower’s lighting system got put to some creative use. Installed 2 years ago, the RGB LED-based system is composed of 1330 individually addressable lights lining the glass elevator shafts. It costs just under $1000 to run almost every evening for a month. Named ‘Bright Lights Big City’ (not to be confused with the book, movie, or song of the same name), this project was coordinated by [Ryan Stec]. The lights on the tallest freestanding structure in North America were animated to CUIT 89.5 FM for the entire night. This innovative solution allowed one to appreciate the light show from almost anywhere in the city with access to a radio.

Read more...

Internal Wireless Headphones

Wireless headphones can be a wonderful way to help clear up the clutter inherent in most desktop PC systems. However, after plugging a wall wart in, and the headphone jack into the computer, the number of wires used has actually doubled. After [Parker] found an old set of JVC 900 Mhz wireless headphones (and a generic 900MHz transmitter), he cracked open the case to see what he could do with them. Realizing that the transmitter used a 12V DC source, he powered it with an unused floppy connector (which provides +12V, +5V, and two ground lines). He also wired the audio-in line directly onto his sound card headers rather than feeding out a headphone jack to the back. He then wrapped the whole thing in plastic to prevent unwanted shorting and placed it back in his PC, leaving him with a very functional wireless system. Detailed photos after the break.

Read the rest of this entry »

Read more...

Add IR control to your WiFi router

[Craig] wanted to use Boxee on his TV but his computer was in a different room. He rigged up a rather dubious method of delivering the A/V signal (this is a hack in the most guttural sense). More interesting to us is his solution for a remote control interface. We’re familiar with building USB connected infrared receivers but [Craig] decided to patch one into the serial connection on his Linksys WRT54G router. Read the rest of this entry »

Read more...

Harry Potter Marauders map realized

After reading about cheap wireless for microcontrollers, [Leigh] left a comment about his Marauders map. Much like the Harry Potter version, whoever holds the ‘map’ is able to see the location of the ‘marauders’ within certain bounds. Unlike the magical version however, each person being tracked needs to hold a PICAXE 08M, GPS, and 433.92MHz transmitter: while the map needs a computer running his Python script and a receiver of the same frequency. It has the potential for locating people, but we feel it might be better off in a swarm robotics setup.

Read more...

How to replace a Netgear router antenna

a.ntivir.us wanted to use a different antenna for their Netgear mbr624gu WiFi router. Unfortunately, this model comes with an antenna that is not removable. As with other antenna retrofits, this involves no soldering. But because there is already a mounting area for an antenna, no case altering is needed either. After opening the router with a Torx driver it was discovered that the non-removable antenna was connected to the board with a mini rf connector (U.FL). The antenna and its mounting bracket were removed and a U.FL to RP-SMA adapter was put in its place using a washer to secure it to the rear plate of the router. Now any external antenna can be used and the router still looks brand new.

Read more...

Various Cantenna builds

posted by Steve Watkins
filed under: home hacks, roundup, wireless hacks

Here is a classic project used to increase wireless signal strength. Cantennas focus using a waveguide very much like a magnifying glass focuses light. [Robert] made a Natural Light beer cantenna, pictured in the upper left. His approach used three beer cans, a paper towel holder, and a shower curtain rod. On the tipline, he noted a signal boost from 11Mbps to 54Mbps. This is certainly something we can hack together if our room lacks adequate signal. Read about parabolic and seeking versions after the break.

Read more...