Choreographed Christmas light show (x4)

[Lucas] is at it again this year. Not satisfied by the computerized systems available on the market, [Lucas] decided to build on last year’s project. To save a bit of cash, he built the setup around Parallax’s low-cost SX28 proto board. The system is capable of controlling 102 channels, with 8-bit dimming. 6 boards control 7 channels each and are communicated to through a serial protocol (reducing the whole setup to only 36 feet of wiring).

More importantly, he’s teamed up with 3 other neighbors who also share a passion for outdoor Christmas lighting and they’ve put together the Christmas Tour of Lights. Money raised from all donations goes directly to the St. Jude Children’s Reasearch Hospital in Memphis, Tennessee.

Read more...

Fix a projector on the cheap

[j] sent in this nice writeup on how to revive a dead projector. he managed to pick one up for $20 that had a broken bulb. While the prices of bulbs have come down considerably, they can still be a couple hundred dollars. Being resourceful, he decide to just use a halogen bulb that he picked up at his local big box shop. In the photos, he’s using a 50w mr16 bulb. The results really aren’t too bad. Especially considering that his cost for the entire project is now roughly $25. He does, however suggest that a 100 watt bulb wouldn’t be a bad investment. His projector seems to need some cleaning and adjustment in the lenses as well, but for $25 it isn’t too shabby. We’ve had this submission for a bit, but it didn’t have any pictures of the projector actually working. During our conversation, we may have possibly suggested a picture we’d like to see. You can find it after the break.

We did cover a very similar one last year, which had the driver integrated into a custom bracket, but the project page seems to be gone. There is also the possibility that the projector you get doesn’t just have a bulb problem. Sometimes it is the polarizer that needs replaced.

Read the rest of this entry »

Read more...

Terminate RFID tags

This gun hunts only RFID tags.[mnt], who brought us laser gesture control, built this RFID Zapper but included so much more. Any good weapon has to sound mean, a feat he’s accomplished by incorporating an MP3 player into the rifle. The coil that zaps the RFID tag is powered by a photo-flash unit, but for visual feedback he’s got a second unit that flashes light to signal the demise of your German passport (see the video after the break).

It’s hard to believe we haven’t covered RFID Zappers yet. The concept came out of the Chaos Communication Congress a few years back. This method works by sending a very strong electromagnetic field through the RFID tag that causes it to burn out. There’s a wiki post on RFID Zappers but Firefox threw a certificate warning when we loaded it up; read at your own risk.

Read the rest of this entry »

Read more...

Bluetooth handset

Cramming Bluetooth headset circuitry into an analog telephone body has become an extremely popular hack. With declines in the prices of these headsets, and older telephones being seen as storage-room-clutter this hack is just waiting for you to get started. Join us after the break for a look at what others have already accomplished.

Read the rest of this entry »

Read more...

Atmolight clone of an Ambilight clone

[Fun3] wasn’t satisfied with current methods for duplicating Philips Ambilight. He wanted a completely plug and play solution without soldering so he could expand upon it in the future. This meant Arduino, ShiftBright, and (it pains us to say this) pre-made cables. Some of you are cringing at the thought of no real ‘work’ being necessary, but remember, now this is much easier for your “I can’t change the VCRs clock” aunt to set up and enjoy. Plus it’s quick, easy, and most importantly – clean, something a lot of hackers have a problem with.

Read more...

19th century all-in-one PC

…well not quite, but Victorian-styled nonetheless.

In the same vein as his previous creation, [Jake] decided to steampunk his new monitor. However, this time around, he managed to squeeze a full pc into the retro case. A custom aluminum chassis had to be designed and safely house the disk drives and motherboard behind the monitor. Since the 350W PSU was a bit too clunky to mount behind the screen, [Jake] rebuilt the base of the unit around it. The P4, 250GB SATA hard drive, and gold painted cooling fan allow the machine to run Kubuntu “Gusty Gibbon” smoothly. Coupled with a typewriter-inspired keyboard, [Jake's] got a cutting edge antique setup.

Read more...

Hacking ZigBee chips: CC2430

[Travis Goodspeed] took an in-depth look at the debugging protocols for some ZigBee chips and posted his findings. In particular he’s looking at the CC2430 System-on-chip. These chips have a debugging protocol that is not hard to implement if you know what you’re doing. Certainly his tips make it easier for the rest of us. Don’t miss the info about reading from, writing to, and overcoming security of this hardware.

Read more...